-
Sodium Salicylate BP/USP/EP Grade
Sodium Salicylate BP/USP/EP Grade¥ 0.00Check the details
-
Salicylic acid BP/USP Medical Grade
Salicylic acid BP/USP Medical Grade¥ 0.00Check the details
-
Salicylic acid Technical grade
Technical Grade Salicylic Acid
Molecular Formula: HOC6H4COOH
Molecular weight: 138.12
CAS# 69-72-7
Quality specification: HG/T3398-2003
Appearance: slight pink to off white crystalline powder¥ 0.00Check the details
-
Magnesium Sulphate
Magnesium Sulphate
Molecular Formula: MgSO4nH2O (n=0,1,2,3,4,5,6,7)
Molecular Weight: 120.37+18n (n= 0,1,2,3,4,5,6,7)
CAS No: 10034-99-8 (MgSO47H2O)¥ 0.00Check the details
-
DOTP Dioctyl terephthalate
DOTP Dioctyl terephthalate
Major performance:
1.DOTP is a sort of high-performance primary plasticizer with good electrothermal properties.
2.DOTP has favourable cold-resistance, heat-resistance, extraction-resistance performace, with low volatility and high plasticizing efficiency.
3.This product can be mixed with DOP at free percentage.
4.This product can reduce viscosity and increase preserve life in the application of plasticized paste.¥ 0.00Check the details
-
DBP Dibutyl phthalate
DBP Dibutyl phthalate
DBP Dibutyl phthalate is the major plasticizer for celluosic resin and PVC products, especially suitable for the nitrocellulose coating. It has quite good solubleness, decomposability and adhesiveness, as well as softness and stability. Since the good intermiscibility, it can be used to colored film, artificial leather and plastics, and also good plasticizer or softener for natural rubber in the aspect of improving the products’ rebound resilience.¥ 0.00Check the details
-
DOP Dioctyl Phthalate
DOP Dioctyl Phthalate
Widely applied to the production of PVC, vinyl chloride copolymer and cellulose resins, also can be used to make thin film, artificial, wire, cable sheet, panel, molding, plasticized paste etc.
This product can also be used as the softener for synthetic rubber, such as nitrile rubber, will improve the product’s rebound resilience and decrease compression set. In addition, is has no influence on the vulcanization of glue stock.¥ 0.00Check the details
-
Ammonium Sulphate granular
Ammonium Sulphate granular
Specification
Appearance white Powder
Nitrogen 21% min
Moisture 1% max
Size 0-1mm
Sulphur 24%min¥ 0.00Check the details
-
Methyl Salicylate BP/USP
Methyl Salicylate BP/USP Winter Green Oil
Colourless or light yellow oily liquid, Melting Point-8.6℃,boiling point 223.6℃, relative density 1.1738,
refractive index 1.5369, easily soluble in alcohol, acetic acid, soluble in ether, chloroform, slightly soluble in water.¥ 0.00Check the details